Make sure the switch is in the powered mode position. Some powered hubs also have a switch on them to switch back and forth between powered mode and nonpowered mode. If your hub is a powered hub, make sure that you have connected the power supply to AC power. If you have a non-powered USB hub, you may need to plug your device directly into the USB port on the computer. Non-powered hubs may not provide sufficient power for your USB device. Some USB devices fail to operate properly if plugged into non-powered USB hubs.Ĭheck to see if your USB hub has its own power supply (powered) or if it gets its power simply by plugging into the USB port on the computer (non-powered). If your computer is USB 2.0-compliant, and you're still getting low-speed results, see the Microsoft Knowledge Base article Advanced troubleshooting tips for general USB problems in Windows XP* for more detailed information.ĭevices do not work when plugged into USB hubs.Ensure High Speed USB is enabled in BIOS:.Refer to the manufacturer’s website for the latest drivers. E210882 Intel D915GFA Socket LGA 775 Intel Pentium 4 Processors Support DDR2 4x DIMM ATX Motherboard (Refurbished) Mfg Part No: E210882. Make sure you have the latest drivers for the USB device you are using. E210882 Information for Intel® Desktop Boards What are the specications of an Intel e210882.If you see messages in Windows like A Hi-speed USB device is plugged into a non-Hi-speed USB hub, try the following: ![]() USB 2.0 devices operate at USB 1.1 speeds (May be listed as USB Legacy)Īny USB mouse or keyboard should now work in DOS mode.
0 Comments
Leave a Reply. |